Clunking or rattling over speed bumps
Do you hear a clunk, a knock or a rattle when you drive over a speed bump or a brick-paved street? Then a part of the suspension usually has play in it.
In this article we explain which parts are the usual suspects, how to describe the noise to a garage and what the APK (MOT), the Dutch roadworthiness test, says about them.
By the team at Autobedrijf Willemsbrug, RDW-approved APK (MOT) test station, family business since 1979 · Updated 8 November 2026
Our score is 4.8 / 5 from 237 reviews. Read what our customers say
Our team speaks English, on the phone too. Have your registration number (kenteken) ready and tell us what you notice. We tell you what we check first, what that costs and when you can bring the car. Open Monday to Friday 8.00 to 17.30, Saturday 9.00 to 15.00.
The short answer
A car that clunks or rattles over speed bumps usually has play or worn rubber bushes in the suspension. According to the ANWB and KYB, common causes are the anti-roll bar links and bushes, ball joints and the shock absorber mountings.
Control arm bushes or a loose exhaust can also be the cause. A test drive and a check on the lift show which part it is.
Why does my car clunk over speed bumps?
Your car clunks over speed bumps because a part of the suspension has play in it or a rubber bush is worn. On a speed bump the wheel moves up and down quickly. If there is room where there should be none, metal hits metal. You hear that as a clunk, a knock or a rattle.
According to shock absorber manufacturer KYB, the most common causes of clunking over bumps are the mounts and the parts attached to the shock absorber. KYB also names ball joints and the anti-roll bar bushes and links as common causes.
The ANWB, the Dutch motoring organisation, says that a rattle over brick-paved roads, speed bumps and other uneven surfaces is a common sign of a worn anti-roll bar or worn anti-roll bar bushes.
| What you hear or notice | Possible cause | What the APK says |
|---|---|---|
| Rattling or knocking at the front over brick-paved streets and speed bumps | Possible causeAnti-roll bar links or bushes | What the APK saysFail if the anti-roll bar is not securely mounted, or if the mounting bushes are completely gone (art. 5.2.26) |
| Creaking or squeaking over bumps | Possible causeDried-out or hardened anti-roll bar bushes | What the APK saysFail if the bushes are completely gone or the bar is not securely mounted |
| A dull thud over a speed bump | Possible causeWorn or torn control arm bushes | What the APK saysFail if a pivot point has more than 1.0 mm play from wear in the direction of the load (art. 5.2.19) |
| Clunking or rattling over uneven roads | Possible causeA ball joint with play | What the APK saysFail at more than 1.0 mm play from wear, or a dust boot that no longer seals (art. 5.2.19) |
| A knock high up, near the bonnet or the tailgate | Possible causeTop mount or shock absorber mounting | What the APK saysShock absorbers must work properly and be securely mounted (art. 5.2.28) |
| A metallic rattle under the middle or the rear of the car | Possible causeTorn exhaust hanger rubber or bracket | What the APK saysThe exhaust must be securely mounted (art. 5.2.11) |
Sources: ANWB, Stabilisatorstang. KYB, Noises after shock/strut replacement: causes. RDW, APK-handboek personenauto’s, articles 5.2.11, 5.2.19, 5.2.26 and 5.2.28 (consulted November 2026). The table is a guide. The cause only becomes clear on a test drive and a check on the lift.
For other noises, such as humming at speed or squealing when braking, see our page car making a noise: finding the cause.
Knocking at the front over bumps: is it the anti-roll bar?
A knocking noise at the front over bumps often comes from the anti-roll bar, and then usually from its links or bushes. The anti-roll bar (also called a stabiliser bar or sway bar) is a steel bar that connects the left and right side of the suspension. According to the ANWB, it makes the body lean less in corners.
At each end there is a short rod with a ball joint, the anti-roll bar link (drop link). In the middle, the bar is held to the body in rubber bushes.
According to the ANWB, the bar itself can easily last 10 to 20 years. The rubber bushes and the links wear sooner. The ANWB says they often last around 80,000 to 150,000 km, depending on driving style, road surface and conditions.
What does it cost?
According to the ANWB, replacing only the anti-roll bar bushes often costs around € 100 to € 250, the anti-roll bar links usually around € 150 to € 400 per axle, and a complete anti-roll bar, including labour, around € 300 to € 800 or more (consulted November 2026).
The ANWB amounts are indications, not our prices. We tell you your price in advance based on your registration number.
Does your car have this problem? We look for the cause first. Then we tell you in advance what is needed and what it costs.
Rattle under the car: control arm, ball joint or exhaust?
A rattle under the car can come from the suspension, but also from the exhaust. You can often tell the difference by the type of noise and where it comes from.
Control arm bushes. The control arm (often called a wishbone in the UK) connects the bottom of the wheel to the car. Where the arm is attached to the car, it sits in rubber bushes. If those bushes are torn or have sagged, the arm moves too much. You then often hear a dull thud over a speed bump.
Ball joint. The ball joint is the pivot between the control arm and the part the wheel turns on. It lets the wheel steer and move up and down.
According to KYB, ball joints are a common cause of clunking over bumps. At the APK, a ball joint may have no more than 1.0 mm play from wear. We replace control arms and bushes, ball joints and track rod ends ourselves.
Exhaust. The exhaust hangs under the car in rubber hangers and brackets. Hanger rubbers can dry out and tear, and brackets can rust. If the exhaust hangs loose, it hits the underside of the car over a speed bump. That sounds more metallic than a knock from the suspension. We replace exhaust hanger rubbers and clamps ourselves.
Can a shock absorber or top mount clunk over speed bumps?
Yes, but it is usually not the shock absorber itself. According to KYB, a clunk over bumps more often comes from the mounting. On a strut, that is the upper bearing, the top mount.
KYB writes that the rubber in these mounts changes over time and that the bearings wear. Mountings and bushes can look tight during a check and still move slightly while you drive.
You are more likely to notice a worn shock absorber itself by the car bouncing. According to the ANWB, a floating feeling in corners, or a car that keeps bouncing after a speed bump, can mean that one or more shock absorbers are worn.
How a strut and top mount work is explained in strut, top mount and coil spring: what they do and when to replace them.
We test shock absorbers first. We only replace what is worn, per axle, and we tell you one amount in advance based on your registration number. More on our page about shock absorber replacement in Rotterdam.
Will the car fail the APK if it rattles over speed bumps?
No, the noise itself is not a reason to fail. The inspector does check the parts that often cause the noise. According to the APK manual of the RDW, the Dutch vehicle authority (consulted November 2026), these rules apply:
The inspector checks this from underneath, with the car over a pit or on a lift. More about the suspension rules is in shock absorbers and springs at the APK: when does a car fail. We are an RDW-approved APK station and we also repair suspension items that failed the APK.
Can you keep driving if the car clunks over speed bumps?
If the rattle is mild and the car steers and brakes normally, you can usually drive carefully to the garage. Keep your speed low, avoid the motorway if you can and take speed bumps slowly. Do not wait too long.
The ANWB advises having a rattling, thumping or creaking noise checked in good time, so the car stays safe and stable on the road.
How does the garage find where the noise comes from?
We find the source with a test drive and a check on the lift. A noise is often hard to hear with the car standing still in the workshop, so we first drive over speed bumps and a poor road surface.
After the test drive, the car goes on the lift and we check the suspension, the anti-roll bar, the ball joints, the bushes and the exhaust for play and cracks.
How we trace a fault or a noise is also explained on our page about car diagnostics. We have five heavy-duty lifts for cars, vans and motorhomes up to 3,500 kg, and our own wheel alignment equipment.
- Tell us whether you hear the noise at the front or the rear, and on the left or the right.
- Tell us whether you hear it at low speed, when braking, in a corner or only on a speed bump.
- Record the noise on your phone if you can.
- Tell us whether the car recently hit a kerb or a pothole.
A new control arm or ball joint can change the position of the wheels. If the manufacturer asks for an alignment after this work, it is included in the quote straight away. Read more in wheel alignment after suspension repairs.
For every repair we tell you the price in advance based on your registration number. We only repair with your approval.
For a noise you can walk in Monday to Friday, and we see whether we can look at it straight away.
Would you rather make an appointment? Call +31 10 479 00 00. Our team speaks English. Autobedrijf Willemsbrug is at Boterdiep 11 in Rotterdam-IJsselmonde, close to exit 24 of the A16. The A15 is quick to reach via the A16.
Read more
Frequently asked questions
Sources
- ANWB: Stabilisatorstang: signs, lifespan and costs (in Dutch) (opens in a new tab)
- ANWB: Schokdempers: function, signs and replacement (in Dutch) (opens in a new tab)
- RDW: APK-handboek personenauto’s: Stabilisatoren, article 5.2.26 (in Dutch) (opens in a new tab)
- RDW: APK-handboek personenauto’s: Fuseepennen, -lageringen, -bussen en -kogels, article 5.2.19, play 1.0 mm (in Dutch) (opens in a new tab)
- KYB: Noises after shock/strut replacement: causes (opens in a new tab)